Buderus Logano GE515 Installation And Maintenance Instructions Manual page 33

8.8.4 Hot gas check plate on the front section
At the factory, the hot gas check plates (Fig. 33, [1] and
[2]) are secured to the front section with one Allen screw
each.
8.8.5 Insert the hot gas baffle plates
USER NOTE
The hot gas baffles are already fitted if the
boiler is supplied as pre-assembled unit.
You need only remove the corrugated
cardboard packaging used to secure
the baffles in transit.
Remove the hot gas baffle plates from the fitting crate
and insert it into the hot gas ways according to the
instructions cast into the body (
following table).
Length of the
Number
Boiler hot gas baffle
of boiler
size
sections
240 7
295 8
350 9
400 10
455 11
510 12
Logano GE515 - We reserve the right to make any changes due to technical modifications.
Fig. 34 and the
Fitting
instructions on
the hot
plate
gas baffle plate
in mm
(Fig. 34)
oben rechts
(r.h. top)
oben links
(l.h. top)
680
unten rechts
(r.h. bottom)
unten links
(l.h. bottom)
oben rechts
(upper r.h.)
oben links
(top l.h.)
425
unten rechts
(r.h. bottom)
unten links
(l.h. bottom)
– –
Boiler block assembly
2
1
Fig. 33 Location of the hot gas check plates
2
1
Fig. 34 Hot gas baffle plates
1
Hot gas baffle plates (unten rechts)
2
Hot gas baffle plates (unten links)
3
Hot gas baffle plates (oben links)
4
Hot gas baffle plates (oben rechts)
8
3
4
33