Arrangement Of Boiler Sections Within The Boiler Block; Joining The Boiler Block Assembly - Buderus Logano GE515 Installation And Maintenance Instructions Manual

8.1 Arrangement of boiler sections within
the boiler block
The boiler block is assembled from the rear to the front,
commencing with the rear section (Fig. 8, [3], page 18).
Always assemble the front section (Fig. 8, [9], page 18)
last.
During assembly please observe the arrows denoting
the direction of installation (Fig. 8, [8]) and proceed
according to the following instructions and illustrations.
DANGER OF INJURY
through inadequately secured boiler
sections.
CAUTION!
With the installation template, secure
the rear/end section against tipping.
Buderus supplies the installation
template (accessory) on request.
8.2

Joining the boiler block assembly

Prior to fitting the front and rear sections, remove the
nuts and washers from the bolts on the boiler section
hubs.
USER NOTE
Remove the clean-out cover from the
rear section, if you are using the
installation template, to secure the
template.
Remove the clean-out covers on the rear section
(Fig. 10, [1] and [2]).
Logano GE515 - We reserve the right to make any changes due to technical modifications.
Boiler block assembly
Fig. 9 Rear section with mounted installation template
2
Fig. 10 Remove the clean-out covers
8
1
19