Table of Contents
Advertisement
7
Boiler block assembly
WARNING: Risk of injury from improperly secured
boiler sections.
▶ Use only suitable means of transportation when
handling the boiler sections, e.g. a heavy duty hand
truck with strap or a heavy duty hand truck.
▶ Secure the individual boiler sections to prevent them
from sliding off during transport.
5
4
3
2
1
Fig. 8
Boiler heat exchanger
[1]
Boiler base or foundation
[2]
Exhaust manifold
[3]
Rear section
[4]
Return connection
[5]
Supply connection
[6]
Intermediate section
[7]
Tie rod
[8]
Sequence of installation
[9]
Front section
[10] Burner door with burner plate
Depending on the type of delivery, we distinguish between delivery as
disassembled sections and as ready assembled block. When delivered
as a block, the boiler sections are already fully assembled and checked
for leaks prior to delivery. If the assembled boiler is too large or too
heavy to be brought to its final installation location in the building,
delivery of the disassembled boiler in sections offers a solution.
For the further installation of a pre-assembled boiler block, see
Chapter 7.3, page 18.
Logano G515 – 6 720 647 208 (2014/09)
7.1
Assembly of a boiler block from sections
7
8
9
10
7
Fig. 9
Rear section
720 42 23-0 .1o
The boiler block is always installed starting from the rear with the rear
section ( Fig. 8, [3], page 13) and working toward the front. The front
section ( Fig. 8, [9], page 13) is always fitted last.
Observe the directional arrows ( Fig. 8, [8]) during assembly and
carry this out in accordance with the following instructions and
illustrations.
Boiler block assembly
WARNING: Risk of injury from inadequately secured
boiler sections.
▶ Secure boiler sections during assembly and take
measures to prevent them from tipping over. The
installation aid (accessory) is available from Buderus
on request.
7
720 42 21-04.1o
13
Hide quick links:
Advertisement
Table of Contents
