Wet-Cleaning The Boiler - Buderus Logano GE515 Installation And Maintenance Instructions Manual

14 System inspection and maintenance

14.4 Wet-cleaning the boiler

When wet-cleaning, use a cleaning agent appropriate
for the level of contamination.
Proceed with the wet cleaning in the same order as for
cleaning with brushes (
boiler with cleaning brushes", page 57).
USER NOTE
For wet-cleaning (chemical cleaning),
observe the operating instructions of
the relevant cleaning equipment and
the cleaning agent.
It may be necessary to vary the wet-
cleaning process from that described
here.
Select a cleaning agent in accordance with the level
of contamination (soot level or encrustation).
Cover the control device with foil; spray must not
enter into the control device.
Spray cleaning agent evenly from the top into the hot
gas flues.
Heat up the boiler water temperature to at least
70 °C.
Brush out the hot gas flues.
60
chapter 14.3 "Cleaning the
Logano GE515 - We reserve the right to make any changes due to technical modifications.