8
Boiler block assembly
8.9
Installing the boiler shell
This section describes how to fit thermal insulation and
casing components.
USER NOTE
Fit the cross and longitudinal rails before
the thermal insulation to enable you to
correctly align the mounting brackets.
You should first remove the longitudinal
rail in the following step to enable the
thermal insulation to be fitted.
8.9.1 Installing the mounting brackets
Loosly fit the mounting brackets for the boiler shell in
accordance with drawing 35 and 36 to the top l.h. and
r.h. fins of the boiler sections.
USER NOTE
Secure the mounting brackets with
screws to the rear section (Fig. 36, [2])
from the rear through the fins.
Secure the mounting brackets on the
front and centre sections (Fig. 36, [1])
exclusively from the front.
Total
Installation on the r.h. and l.h. side of
number of
Front
boiler
section no.
sections
7
1
8
1
9
1
10
1
11
1
12
1
34
Centre
Rear
section no.
section no.
4
7
4
8
5
9
5
10
4 and 7
11
4 and 8
12
Logano GE515 - We reserve the right to make any changes due to technical modifications.
Fig. 35 Plan view: Boiler block (7 boiler sections) with
mounting brackets
1
Fig. 36 Install the mounting brackets
2