Kodak MULTILOADER 700 Service Manual page 77

REPAIR KITS
Note
This SPRING is riveted to the FRAME. Remove the RIVETS with a CHISEL and a HAMMER.
It is okay if the RIVETS fall into the hollow FRAME.
3
. Take out the existing MAGAZINE DOOR SPRING.
4
. Enlarge the rivet holes in the frame. Use the DRILL BIT from the REPAIR KIT.
5
. Mount the SPRING from the REPAIR KIT with 2 of the SELF TAPPING SCREWS
from the KIT.
KODAK AG, Stuttgart
MAGAZINE DOOR SPRING
figure 3-2
3-3
SM 3053-3
SELF TAPPING SCREW
12/1998