Table of Contents
Advertisement
ADJUSTMENTS
3
.
Disconnect STEPPER MOTOR M8.
4
.
Take out all MAGAZINES and insert an empty MAGAZINE into the selected TEST
LOCATION.
5
.
Loosen the REFERENCE BRACKET for the TEST MAGAZINE.
6
.
Connect the power to the ML 700.
7
.
Go to SERVICE MODE .FDAB ,Day,Day,9,9
8
.
Move SERVICE SWITCH on PCB A0 to the left.
9
.
Open the selected TEST MAGAZINE and start the SENSOR TEST.
10
. Move the FILM POCKET carefully down until the FILM POCKET SUCKER BAR can
be moved freely into the opened MAGAZINE.
11
. Move the REFERENCE BRACKET slowly down, until the SENSOR TEST indicates
that the REFERENCE POSITION PHOTOCELL RP (B15) is covered.
KODAK AG, Stuttgart
figure 4-77
4-73
3053-3
12/1998
Advertisement
Table of Contents
