Table of Contents
Advertisement
ADJUSTMENTS
TRANSPORT POSITION TP
1
.
Start SENSOR TEST.
2
.
Rotate the SUCKER BAR ARM down to a vertical position (6 o'clock position).
3
.
Open the SETSCREW of the RIGHT HAND TIMING DISK.
left-hand TIMING DISK
SENSOR B12 (TP)
4
.
Rotate the RIGHT HAND TIMING DISK until SENSOR TRANSPORT POSITION
B12 (TP) becomes interrupted. This is indicated by a BEEP from the SENSOR TEST.
5
.
Tighten the SETSCREW.
6
.
Leave the SERVICE MODE.
7
.
Key in 3585 to bring all MOTORS to their HOME POSITION.
8
.
Run several TEST CYCLES.
KODAK AG, Stuttgart
right-hand TIMING DISK
figure 4-71
4-67
3053-3
PCB A7
12/1998
Advertisement
Table of Contents
