Table of Contents
Advertisement
REPLACEMENTS
15.
Remove the 2 right-hand ALLEN SCREWS from BELT SUPPORT.
ALLEN SCREWS
16.
Take out FRONT and REAR TRANSPORT ROLLERS.
17.
Pull out TRANSPORT BELT.
Note
Do not scratch the silicon surface of the new TRANSPORT BELT.
18
. Install new TRANSPORT BELT.
19.
Install all parts removed in steps 5 to 16.
20
. Do the CASSETTE SUPPORT ADJUSTMENT. See Chapter 4.
FUNCTION TEST
1
.
Enter SERVICE MODE FDAB, Day, Day, 9.9.
2
.
Select Option 7.1 (FEED CASSETTE).
3
.
Move BELT forward and backward.
4
.
Leave SERVICE MODE.
5
.
Key in 3585 to bring all MOTORS to HOME POSITION.
KODAK AG, Stuttgart
BELT SUPPORT
figure 2-41
2-43
3053-3
12/1998
Advertisement
Table of Contents
