3053-3
14
. Insert the MAGAZINE into LEVEL 1 and check the adjustment again. Use a
DENTIST MIRROR.
15
. If necessary do the corrections.
16.
Feed a CRT CASSETTE into the MULTILOADER and open it.
17.
Move the FILM POCKET to the CASSETTE LEVEL.
18.
Rotate the MAGAZINE SUCKER BAR to the MSI POSITION
Note
This adjustment is especially critical when X-OMATIC CASSETTES and VIDEO FILM
HOLDERS are used, because there is a difference of 5 mm in the LIGHT LOCK POSITION in
relation to the METAL EDGE of the CASSETTES.
19.
Check that the MAGAZINE BLOW PIPES are in the area of the CASSETTE LIGHT
LOCK.
SCREEN
X-OMATIC CASSETTE
20.
If the position is not correct, loosen SCREW 1 (fig 4-63) and the LOCK NUT from
the MAGAZINE SUCKER BAR ARM and move it in or out as required.
21.
Fasten SCREW 1 and the LOCK NUT.
22.
Check that SENSOR B16 (Magazine Almost Empty) is still working.
12/1998
MAGAZINE BLOW PIPE
LIGHT LOCK
VIDEO FILM HOLDER
figure 4-67
4-64
ADJUSTMENTS
KODAK AG, Stuttgart