Table of Contents
Advertisement
ADJUSTMENTS
12.
Move the CASSETTE OPENER BRACKET up fully and toward the front of the
MULTILOADER.
13.
Remove the CASSETTE.
14.
Check the alignment of the edges of the ENTRANCE DOOR CAM and the BALL
BEARING. If necessary:
•
Loosen the 2 SETSCREWS.
•
Adjust the 2 ENTRANCE DOOR CAMS.
•
TIGHTEN the 2 SETSCREWS.
•
Check again.
KODAK AG, Stuttgart
figure 4-31
4-29
3053-3
12/1998
Advertisement
Table of Contents
