Table of Contents
Advertisement
3053-3
Adjustment of the CASSETTE CENTRING BRAKE for ML700 with Mod.26
and for ML700 Plus
PURPOSE:
To ensure that the CASSETTE is centred properly and that there is a gap of 1 - 2 mm
between the CASSETTE 18x24 cm X and the CENTRING BARS on each side.
Note
•
This gap is smaller if larger CASSETTES are used
•
Check the ADJUSTMENT OF CASSETTE CENTRING STOP SWITCHES S14/15 (CCS)
first.
•
No FILMS are required for this adjustment
•
Required Tools: WRENCH 8 mm. Use WRENCH KIT PN G9901934 or TL2765.
28
Check that there is a gap of 1-2 mm between BRAKE STOP and BRAKE BELT
TENSIONER. If it touch loosen the 2 MOUNTING SCREWS and move the BRAKE
STOP as requiresed. Tighten the SCREWS.
ADJUSTMENT NUT
12/1998
The BRAKE STOP should not touch the
BRAKE BELT TENSIONER here.
There should be a gap of 1-2 mm.
figure 2-10
2-12
REPLACEMENTS
MOUNTING SCREW
ADJUSTMENT NUT
KODAK AG, Stuttgart
Advertisement
Table of Contents
