Table of Contents
Advertisement
3053-3
33.
While the CASSETTE is removed, check that SWITCH S8 is actuated.
34.
Lift the CASSETTE OPENER BRACKET up fully.
35.
Rotate the CASSETTE OPENER BRACKET down slowly. Check that S8 actuates
before S6 deactuates.
36.
Exit the SERVICE MODE.
37.
Using at least one of each size and type of CASSETTE, check that the
MULTILOADER operates correctly.
ADJUSTMENT OF PRESSURE BOLTS
PURPOSE:
The PRESSURE BOLTS are for relaxing the tension of the CASSETTE LATCH. This allows
easy unlatching and closing of the CASSETTE.
1
.
Feed in thinnest CASSETTE available to the CASSETTE STOP.
2
.
Rotate the SWITCHING SHAFT until the PRESSURE BOLTS reach their lowest
position. Check that the CASSETTE is not lifted from the BELT. If this occurs adjust the
CASSETTE SUPPORT.
3
.
Check that the WASHERS rotate freely. If they are tight remove the appropriate
amount of WASHERS.
WASHER
ROLLER
PRESSURE BOLT
12/1998
C-RING
figure 4-38
4-36
ADJUSTMENTS
SWITCHING SHAFT
CASSETTE
OPENER
BRACKET
KODAK AG, Stuttgart
Advertisement
Table of Contents
