Table of Contents
Advertisement
3053-3
10.
Move the CASSETTE SUCKER BAR onto OPENER GAUGE as shown by manually
turning the DRIVE SHAFT. If necessary adjust STOP1.
STOP 2
STOP 1
Note
To make sure that the MOTOR for the CASSETTE SUCKER BAR starts immediately when
Key 5 is pressed: Softly lift the MOUNTING BRACKET for the CASSETTE SUCKER BAR
when you press Key 5. Do not lift too strong because the CASSETTE SUCKER BAR should
only be moved by MOTOR for adjustment!
11.
Key in 4, 5 (CASSETTE SUCKER BAR BACK 100 MS usw).
12.
Adjust CAM (do not turn the DRIVE SHAFT) for SWITCH S11 so that SWITCH
S11 just actuates. Tighten the CAM SCREW.
12/1998
OPENER GAUGE
figure 4-42
4-40
ADJUSTMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
