Table of Contents
Advertisement
3053-3
8
.
Change the position of the FILM PRESENCE DETECTOR and observe the
INDICATOR LED until it lights green.
9
.
Reduce the GAIN ( turn the GAIN POT. counterclockwise) of the SENSOR until the
INDICATOR LED goes red and then increase the GAIN again by one step clockwise.
This makes the SENSOR most sensitive to position changes.
10
. Move SENSOR from left to right. Locate left and right position where the SENSOR
LED lights red. Set SENSOR midway between.
11.
Fasten SENSOR SCREWS.
12
. Move SENSOR forward and backward to find both positions where the SENSOR
LED lights red. Set SENSOR midway between.
12/1998
figure 4-52
figure 4-53
4-50
ADJUSTMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
