Kodak MULTILOADER 700 Service Manual page 23

Hide thumbs Also See for MULTILOADER 700:
Table of Contents

Advertisement

INTRODUCTION
After Start of SERIAL UNLOAD the DOOR SOLENOID is energised for 3 seconds. If
during these 3 seconds the FRONT DOOR does not open, the message "NO
MAGAZINE SELECTED FOR SERIAL UNLOAD" is displayed. If BUTTON C is pressed
the STANDARD SCREEN will be displayed again.
3
.
If the INCH FLAG is set to 1, 14x17 in X is displayed and not 35x43 cm X.
4
.
The size 11x14 in V is eliminated.
5
.
All languages are in 1 (one) EPROM.
6
.
After unloading the CASSETTE it is checked once more with the FILM PRESENCE
DETECTOR BOTTOM if there is a FILM on the bottom screen of the CASSETTE. This
is done prior to loading the new FILM. If there is a FILM, the CASSETTE is transported
out and the message PLEASE INSERT CASSETTE AGAIN is displayed.
KODAK AG, Stuttgart
1-15
3053-3
12/1998

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multiloader 700 plus

Table of Contents