Table of Contents
Advertisement
3053-3
16
. Adjust the innermost and outermost position of the CENTRING BARS.
17.
Move CENTRING BARS fully out.
18.
Adjust STOP SCREW 1 until side 1 of the ACTUATOR BRACKET is parallel to the
MOTOR MOUNT.
19
. Loosen the SWITCH BRACKET and adjust S9 to make it actuate 0.6 mm earlier.
20.
Move CENTRING BARS completely in.
12/1998
figure 2-8
2-10
REPLACEMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
