Table of Contents
Advertisement
ADJUSTMENTS
13.
Key in 2, 1 (BACK / TAKE) and check if CASSETTE SUCKER BAR is located on
OPENER GAUGE. If necessary readjust CAM for SWITCH S11.
14
. Adjust STOP1 for the DRIVE SHAFT of the CASSETTE SUCKER BAR to a
clearance of approx. 2 mm to the STOP SCREW on the DRIVE SHAFT.
DRIVE SHAFT CASSETTE SUCKER
15.
Move CASSETTE SUCKER BAR out manually to a clearance of 3 mm between
SUCKER BAR CAM and DRIVE SHAFT of SUCKER BAR. If necessary loosen STOP2.
CASSETTE SUCKER BAR CAM
16.
Adjust S12 to actuate.
17.
Adjust STOP 2 for the DRIVE SHAFT of the CASSETTE SUCKER BAR to a
clearance of approx. 1 mm to the STOP SCREW on the DRIVE SHAFT.
KODAK AG, Stuttgart
STOP 1
figure 4-43
3 mm
figure 4-44
4-41
STOP SCREW
2 mm
DRIVE SHAFT CASSETTE
SUCKER BAR
3053-3
12/1998
Advertisement
Table of Contents
