Table of Contents
Advertisement
3053-3
Important
Check that the CASSETTE is tight against the STOP.
22.
With an 18x24 cm or 8x10 in. CASSETTE opened and in centre position, move the
CENTRING BARS to the home-position.
23.
Use a STEEL RULE TL 4060 to check that the distance between the BELT and the
top corner of the CASSETTE is 95 mm (3.75 in.) or greater.
24.
If the distance is not correct:
•
Rotate the CASSETTE OPENER BRACKET counter clockwise to make the height of
the top corner of the CASSETTE correct.
•
Adjust the position for the CAM of S4 to actuate S4.
Note
If the opening height of the CASSETTE was changed, the relationship of the reflective
stickers on the LID SCREEN and the TOP SURFACE of the CASSETTE with the FILM
PRESENCE DETECTOR and TYPE 2 SENSOR may have changed. In this case do the
CASSETTE FILM PRESENCE DETECTOR and TYPE 2 SENSOR adjustment (page 4-49).
25.
Energise the MULTILOADER.
26.
Place all MOTORS in the HOME POSITION.
12/1998
figure 4-36
4-34
ADJUSTMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
