3053-3
12
. Fasten the REFERENCE BRACKET.
13
. Repeat Step 10 to 13 for the remaining MAGAZINE positions if necessary.
14
. Feed a CASSETTE into the ML700 and open it.
Note
This is especially important for VIDEO FILM HOLDERS because the LIGHT LOCK is approx.
1.5mm higher than on X-OMATIC CASSETTES. The amount of STEPS for the CASSETTE
REFERENCE POSITION has to be below 300. Normally it is in the range of 260 to 280.
15
. Move the FILM POCKET carefully up to the CASSETTE LEVEL, until the FILM
POCKET SUCKER BAR can be moved freely into the opened CASSETTE.
16
. Repeat step 11 to 13.
17
. Leave SERVICE MODE.
18
. Power down the ML 700.
19
. Connect STEPPER MOTOR.
20
. Power up the ML 700.
21
. Go to SERVICE MODE FDAB, Day, Day, 9, 9.
•
Select Option 2 (Change Parameters) .
•
Start NEW (key #2). The ML700 calculates now the steps of the various
REFERENCE POSITION.
•
Leave SERVICE MODE.
22.
Operate the ML700 to take FILM from all MAGAZINES whose REFERENCE
BRACKET position was changed.
12/1998
4-74
ADJUSTMENTS
KODAK AG, Stuttgart