Siemens Sinamics S110 Function Manual page 349

F-DO output screen
Figure 8-18 Output screen
Signal source for F-DO (p10042)
A six-way AND is connected downstream of the output terminal pair of the F-DO; the signal
sources for the inputs of the AND can be selected:
● No signal source (input set to logical HIGH; default)
● Status signals of the drive
LED in the F-DO output screen
The LED downstream of the AND element indicates the logical state (inactive: gray, active:
green).
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
For additional information on status signals, see chapter "F-DO overview" in the "Control
using terminals" section.
Safety Integrated Functions
8.7 Commissioning
349