8.7.3
Commissioning the safety terminals by means of STARTER/SCOUT
8.7.3.1
Basic sequence of commissioning
The following conditions must be met before you can configure the safety terminals:
● Concluded initial commissioning of the drive
Table 8- 12
1
2
3
4
5
6
8
9
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Configuration sequence
Step
Configuring safety terminals
Configure the inputs
Configure the outputs
Change the safety password
Activate the configuration by selecting "Activate settings"
Save the project in STARTER
Execute POWER ON
Acceptance test
Safety Integrated Functions
Execution
8.7 Commissioning
345