Siemens Sinamics S110 Function Manual page 28

General information for commissioning
1.2 BICO interconnection procedure in STARTER
Graphical screen interface
When carrying out BICO interconnection via the graphical screen interface, proceed as
follows:
For the set velocity, which is a 32-bit data type, you want to interconnect p parameter
p1155[0] for "Speed setpoint 1" with r parameter r2060[1], for example.
1. In the project navigator under Drive_1 > Open-loop/closed-loop control, double-click the
Figure 1-7 Interconnection via graphical screen interface 2
28
selection Setpoint addition.
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Drive functions