System Features; Certification; Safety Instructions - Siemens Sinamics S110 Function Manual

Overview of important parameters for "Password" (see SINAMICS S110 List Manual)
● p9761 SI password input
● p9762 SI password new
● p9763 SI password acknowledgment
8.3

System features

8.3.1

Certification

The safety functions of the SINAMICS S drive system meet the following requirements:
● Category 3 to EN 954-1/ISO 13849-1
● Performance Level (PL) d to EN ISO 13849-1
● Safety integrity level 2 (SIL 2) to IEC 61508
In addition, most of the safety functions of the SINAMICS S have been certified by
independent institutes. An up-to-date list of certified components is available on request from
your local Siemens office.
8.3.2

Safety instructions

Note
Additional safety information and residual risks not specified in this section are included in
the relevant sections of this Function Manual.
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Safety Integrated Functions
8.3 System features
291