General Information For Commissioning; The Starter User Interface - Siemens Sinamics S110 Function Manual

General information for commissioning

1.1

The STARTER user interface

You can use STARTER to create the sample project. The different areas of the user
interface are used for different configuration tasks (refer to diagram below):
● Project navigator (area ①): this area displays the elements and objects that can be
● Working area (area ②): you create the project in this area:
● Detail view (area ③): this area contains detailed information on faults and alarms, for
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
added to your project.
– When you are configuring the drive, this area contains the Wizards that help you
configure the drive objects.
– You can configure the parameters for the speed setpoint filter, for example.
– When you call up the expert list, the system displays a list of all the parameters that
you can view or change.
example.
1
21