Standards For Implementing Safety-Related Controllers - Siemens Sinamics S110 Function Manual

8.1.2.3

Standards for implementing safety-related controllers

If the functional safety of a machine depends on various control functions, the controller must
be implemented in such a way that the probability of the safety functions failing is sufficiently
minimized. The standards EN ISO 13849-1 (previously EN 954-1) and EN 62061 define
guidelines for implementing safety-related machine controllers which, when properly applied,
ensure that all the safety requirements of the EC Machinery Directive are fulfilled. These
standards ensure that the relevant safety requirements of the Machinery Directive are
fulfilled.
Figure 8-1
The application areas of EN ISO 13849-1, EN 62061, and EN 61508 are very similar. To
help users make an appropriate decision, the IEC and ISO associations have specified the
application areas of both standards in a joint table in the introduction to the standards. Either
EN ISO 13849-1 or EN 62061 are applied depending on the technology (mechanical,
hydraulic, pneumatic, electrical, electronic, programmable electronic), risk classification, or
architecture.
Drive functions
Function Manual, 10/2008, 6SL3097-4AB10-0BP0
Standards for implementing safety-related controllers
Safety Integrated Functions
8.1 Standards and regulations
275