Installation Procedure - Ricoh B064 Service Manual

Rev. 10/2002
⇒

1.13.2 INSTALLATION PROCEDURE

!
CAUTION
Power the machine off (☛ ☛ ☛ ☛ 1.1.5) and unplug the machine before starting the
following procedure.
1. Remove the rear upper cover (" x2).
2. Remove the controller cover (" x9).
3. Remove the slot cover [A] (" x2).
4. Attach the IEEE1394 board [B].
5. Use the provided cable to connect the machine and the computer.
6. Make sure that the jumper is on TB2 [C].
7. Print a system settings list and confirm that the machine correctly recognizes
the interface.
SM
[A]
IEEE1394 (G336) FIREWIRE INTERFACE
[B]
[C]
B064I205.WMF
1-53 B064/B065