PROGRAM DOWNLOAD
4.2.2 RECOVERY METHODS
When an error occurs during downloading, an error code is displayed on the
operation panel.
• If the download procedure can be re-started, re-start the download procedure.
• If the download procedure cannot be downloaded for other than the GW
controller, replace the board where the downloaded program is stored.
• If the download procedure cannot be downloaded for the GW controller, set DIP
SW 1 to ON. Power the machine off and on to start the downloading program.
After downloading has completed, set the DIP SW to OFF then power the
machine off and on again.
B064/B065
4-2
SM