Ricoh B064 Service Manual page 688

3000-SHEET FINISHER B478
[E]
[A]
B478I006.WMF
9. Install the shift tray [A] ( x4) (M3x8).
10. Open the front door of the finisher, and remove the screw [B] from the locking
lever, then pull the locking lever [C].
11. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever [C].
NOTE: Before securing the locking lever, make sure that the top edges of the
finisher and the copier are parallel from front to rear as shown [D].
12. Secure the locking lever [C] ( x1) again and close the front door.
13. Connect the finisher cable [E] to the copier.
B478
[D]
[C]
[B]
4
B478I534.WMF
SM