Ricoh B064 Service Manual page 767

SOFTWARE UPDATE
Scanner Update
⇒
1. Power off the machine (
2. Disconnect the ADF plug, remove the rear upper cover (
IC card slot cover (
3. With its A side facing up, insert the scanner IC card into the slot.
4. Switch the machine on.
5. Wait for the update screen to open.
Press "Opt DIMM Scn (1)" then press Update (#).
When "Power Off/On" is displayed, the download is completed.
⇒
6. Power off the machine (
switch the machine on.
NIB Update
⇒
1. Power off the machine (
2. Disconnect the ADF plug, remove the rear upper cover (
IC card slot cover (
3. With its A side facing up, insert the NIB data IC card into the slot.
4. Switch the machine on.
5. Wait for the update screen to open.
Press "Network Support (1)" then press Update (#).
When "Power Off/On" is displayed, the download is completed.
⇒
6. Power off the machine (
switch the machine on.
NetFile Firmware Update
Netfile firmware controls jobs to be printed from the document server using a PC
and the DeskTopBinder software.
⇒
1. Power off the machine (
2. Disconnect the ADF plug, remove the rear upper cover (
IC card slot cover (
3. With its A side facing up, insert the NetFile IC card into the slot.
4. Switch the machine on.
5. Wait for the update screen to open.
Press "Network DocBox (1)" then press Update (#).
When "Power Off/On" is displayed, the installation is completed.
⇒
6. Power off the machine (
switch the machine on.
B064/B065
1.1.5 Powering Unit Off).
x1).
1.1.5 Powering Unit Off), remove the IC card, then
1.1.5 Powering Unit Off).
x1).
1.1.5 Powering Unit Off), remove the IC card, then
1.1.5 Powering Unit Off).
x1).
1.1.5 Powering Unit Off), remove the IC card, then
5-14
Rev. 07/2002
x2), then remove the
x2), then remove the
x2), then remove the
SM