LG/B4 FEEDER KIT (B474)
1.5.2 INSTALLATION PROCEDURE
If the LCT is connected to the machine
1. Open the cover and remove the paper.
2. Lower the LCT tray. Cover the near end
sensor [A], then press the tray down
button [B] to lower the tray bottom plate.
3. Disconnect the LCT from the machine
(
1.4.2).
⇒
CAUTION
Power the machine off (
following procedure.
4. Remove the LCT cover [A] (
5. Remove the right cover [B] (
6. Remove the right stay [C] (
B064/B065
1.1.5) and unplug the machine before starting the
x1).
x2).
x2).
1-26
Rev. 07/2002
[A]
[C]
[B]
[B]
B474I507.WMF
[A]
B474I001.WMF
SM