Transfer Current Settings - Ricoh B064 Service Manual

IMAGE TRANSFER AND PAPER SEPARATION

6.8.4 TRANSFER CURRENT SETTINGS

Here is a list of the default current settings for each paper feed station.
SP No.
SP2301 001 Trays 1, 2, 3: Front Side
SP2301 002 Trays 1, 2, 3: Back Side
SP2301 003 Bypass: Front Side
SP2301 004 Postcard: Front Side
SP2301 005 Paper Interval
SP2301 006 Tab Paper
SP2301 007 Thick Paper: Front Side
SP2301 008 OHP: Front Side
SP2301 009 Tracing Paper: Front Side
SP2301 010 Image Leading Edge
SP2301 011 Image Trailing Edge
NOTE: 1) For postcards, use the by-pass tray and set the side fences for A6
width.
2) The charge for cleaning is applied even during the interval between
sheets of copy paper.
3) At the following times, the transfer roller output changes to 2.6 kV, and
the cleaning roller output is fixed at 1.0 kV:
• When the job ends
• Whenever the drum motor is turning, except during copying and during
process control
B064/B065
Station/Mode
6-72
Transfer Current (Initial Value)
80 µA
80 µA
75 µA
165 µA
15 µA
75 µA
120 µA
75 µA
120 µA
65 µA
65 µA
SM