Ricoh B064 Service Manual page 924

Firmware History for B064/B065
When the printer is in standby for printing out pre-set jobs, it displays both the job
information and "Ready."
Display errors on pre-set job screen (user name, document name, last character in
"details" column).
If the host cancels the spool-printing job of a large file (10MB or more) while it is being
printed out, the display reads, "Resetting job" and does not change.
With PCL5e/PCL6 printing, the job name is not displayed on the LCD panel, and the job
is not listed in the job history.
If a slip-sheet size different from the original is specified (Bypass Tray printing), an alert
is displayed and does not clear.
The AP MAC address is displayed even when the wireless LAN is set for Adhoc mode.
Spec change:
The default for the Custom Size (Printer initial settings
Size) has been changed from A4
When specifying 4 holes to be punched in the right side of the paper, 4 holes are
punched in the left side.
After an SP operations error, the correct SP mode number is not logged in the error log.
With the Chinese display language, on the bypass tray size setting screen, the
characters used for the up/down scroll keys are displayed outside their boxes.
Display error on the B469 Finisher tray full screen:
Incorrect: "Remove the paper from_$_Finisher shift tray 1._$__$_ "
Correct: "Remove the paper from_$_Finisher shift tray._$__$_ "
When sending with Centro, "Waiting" is displayed even after the I/F switching time has
been reached.
If program content printing is performed when there is no program, "There is no
program registered" is displayed, but only for a brief moment, and then clears (normal: 3
seconds).
On the forced printing screen when specifying LG (8 1/2 x 14) paper with no orientation,
this size is incorrectly displayed as "8 1/4 x 14."
If "Clear" is pressed on the error clear alert, the machine continues printing.
When locked printing or copy server printing is performed with screen spooling and user
access control both ON, the display reads, "Printing".
When using job cancel while printing out multiple jobs with locked printing, only the
current job is canceled (all other jobs are printed out).
Bold may not work with some True Type fonts.
Slow printing from AutoCAD (GFRP #RC02070001).
Same line width when bitSW3 #3 is ON in CAD printer (GFPR #RE02050016).
The Orientation, Edge to Edge Print and Extend A4 Width menu settings are lost when
the power is turned Off/On (not saved in NARAM), and are returned to their defaults.
Processing time for SP memory clear (SP5-801-008) is too long.
On the forced print screen, if the specified size is "undefined", the size area (4
not displayed.
Mm inch conversion error with custom sizes for bypass tray feeding.
Summary wording change: "Quantity of Print Sets" → "Copies"
When menu lock is enabled from WEB, the Printer initial settings key mark is not
displayed.
Line spacing command, "lochEsc&l#D" loch causes incorrect output (GFPR
#RC02050002).
Stall occurs when there is little memory installed (PCL).
Euro currency symbol is not printed.
When using bold fonts, short lines may appear around text characters.
Text characters appear too thick with some bolded fonts, removing the fine detail.
1st Mass Production
DESCRIPTION OF MODIFICATION
letter for NA. Note: A4 is still the default for EU.
Bypass Paper Size Custom
th
line) is
FIRMWARE
LEVEL
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
G3385204
B0665205B
B0665205B
B0665205B
B0665205B
B0665205B
B0665205B
B0665205B
B0665205B
B0665205B
B0665205B
B0665205A
Page 7 of 10