Installation Procedure - Ricoh B064 Service Manual

1.3.2 INSTALLATION PROCEDURE

[A]
B513I001.WMF
[D]
[E]
B513I003.WMF

CAUTION
Switch the machine off (! 1.1.5) and unplug the machine before starting
the following procedure.
1. Disconnect the finisher from the main frame.
2. Use the flat head of a screw driver to remove the left upper cover [A] from the
finisher and discard it.
3. Remove the cover plate [B] from the jogger unit ( x2). Save the screws.
4. With the jogger unit connector on the left side, hook the frame of the jogger unit
[C] into the holes on the left and right side of the finisher frame.
5. On the left side, fasten the connector [D] to the socket ( x1).
6. On the left and right side, attach the jogger unit frame to the side of the finisher
with the screws [E] provided ( x2).
7. Re-attach the jogger unit cover to its frame with the screws removed in step 2
( x2).
SM
JOGGER UNIT B513 (OPTION)
[C]
11
[B]
B513I002.WMF
B478