Ricoh B064 Service Manual page 267

Hide thumbs Also See for B064:

Table of Contents

Trimmed staple waste hopper full

The hopper that holds the waste

from staple trimming is full.

Finisher pressure plate motor error

The pressure plate motor switches

on but does not return to the home

position within the prescribed time

after 2 counts.

Finisher folder plate motor error

The folder plate motor turns on but

the plate does not return to the

home position within the prescribed

time for 2 counts.

Finisher front saddle-stitch stapler motor error

Saddle-stitch stapler motor fails to

operate within 450 ms within 2

Finisher rear saddle-stitch stapler motor error

Saddle-stitch stapler motor fails to

operate within 450 ms within 2

Finisher jogger side fence motor error

The jogger motor turns on but the

side fences to not return to the

home position within 340 pulses for

Cover interposer bottom plate motor error

• The bottom plate motor turns on

to raise the bottom plate but the

plate position sensor does not

detect the plate within 3 s.

• The bottom plate motor reverses

to lower the bottom plate but the

bottom plate HP sensor does not

detect the plate within 3 s.

SERVICE CALL CONDITIONS

Possible Cause

• Staple waste hopper full

• Staple waste sensor defective

• HP sensor defective