Mercedes-Benz 300 SE 1993 Owner's Manual page 59

Com bination Switch
1 Low beam (exterior lam p
sw itch position | D )
2 High beam (exterior lam p
switch position | D )
3 High beam flasher (high beam
available independent of
exterior lam p sw itch position)
4 Turn signals, right
5 Turn signals, left
To signal m inor directional
changes, such as changing lanes
on a highw ay, m ove com bination
sw itch to the point of resistance
only and hold it there.
To operate the turn signals
continuously, m ove the co m b i­
nation sw itch past the point of
resistance (up or down). The
sw itch is autom atically canceled
when the steering wheel is turned
to a large enough degree.
6 Press sw itch briefly:
One w ipe w ithout w asher w ater
(select only if w indow is wet)
Press sw itch past resistance
point:
W indshield w asher, w indshield
w iper; headlam p cleaning
system (only in exterior lam p
sw itch positions
7 W indshield w iper
0 W iper off
1 Interm ittent w iping
II N orm al w iper speed
III Fast w iper speed
W hen com ing to a stop or
P82-0006-B 13
d riving slow er than approx.
3 mph (5 k m /h ), the w iper
speed auto m a tica lly sw itches to
the next low er setting.
In setting " l", the interval be­
tween w ipes is lengthened.
Upon accelerating again, the
w iper speed returns to the
previous setting.
Note:
The w indshield w asher reservoir,
hoses and nozzles are autom ati­
cally heated.
or | D ■
57