11. Install spare wheel on wheel
hub. Insert wheel bolts and
tighten them slightly.
To avoid paint dam age, place
wheel flat against hub and
hold it there w hile installing
first wheel bolt.
Unscrew the a lignm ent bolt to
install the last wheel bolt.
12. Low er car. R em ove ja ck and
insert jack tube cover.
P 4 0-0026-B 13A
13. U nfold w rench and tighten the
five bolts evenly, follow ing the
sequence illustrated above,
until all bolts are tight.
O bserve a tig hte nin g torque of
110 ft.lb. (150 Nm).
14. C orrect tire pressure.
Im portant!
W hen installing new w heels the
m ounting bolts m ust be retig ht
ened after approx. 60 - 300 m iles
(100 to 500 km).
Before storing the jack, the jack
arm m ust be low ered alm ost to the
base of the jack.
W arning!
In correct m ounting bolts or
im properly tigh ten ed m ount
ing bolts can cause the w heel
to com e off. This could cause
an accident. Be sure to use
th e c o rrect m ounting bolts.
105