Mercedes-Benz 300 SE 1993 Owner's Manual page 111

Replacing bulb:
When replacing halogen bulbs do
not touch glass portion of bulb
with bare hands. Use plain paper
or a clean cloth.
W arning!
Halogen lam ps contain
pressurized gas. A bulb can
explode if you:
• touch or move it w hen hot,
• drop the bulb,
• scratch the bulb.
Bulb for high and low beam
HB2 (6 0 /5 5 W)
Bulb fo r fog lamp
YC (H3) (55 W)
Rem ove cover above headlam p.
M ove retaining clam ps (5) aside
and rem ove cover. Pull off e le ctri­
cal co nn ecto r (8) respectively (9).
U nhook clam ping ring and pull out
bulb together w ith clam pin g ring.
Rem ove bulb.
Insert new bulb (seating properly
in cutouts of bulb socket), m ount
clam ping ring. R einstall and push
electrical connector on securely.
R einstall cover and fasten with
retaining clam ps (5).
R einstall cover above headlam p,
and check lam p for proper
operation.
Turn Signal, Parking, Side
M arker and Standing Lamp
(1157 [2 1 /5 W /3 2 /3 cp] bulb)
R eplacing bulb:
S queeze latch (6) together and lift
com plete lam p assem bly out to
front of vehicle. Tw ist bulb socket
(7) co un terclockw ise and pull out.
Push bulb into socket, turn
co un terclockw ise and rem ove.
Insert new bulb in socket push in
and tw ist clockw ise. R einstall bulb
socket. R einstall lam p assem bly
until properly seated and fasten
latch (6).
109