Example 5: Saving A Preset - Extron electronics DXP DVI Pro User Manual

Example 5: Saving a Preset

In the following example, the current configuration is saved as a preset. The steps show the
front panel indications that result from your actions.
1. Press and release the Esc
Press the Esc button to clear all
ENTER
Figure 37.
2. Press and hold the Preset button until it blinks (approximately 2 seconds).
Press and hold the Preset button until it blinks.
PRESET
2 seconds
Figure 38.
3.
Press and release the input or output button for the desired preset.
Press and release the Input 1 button.
1
Figure 39.
4. Press and release the Enter button. The current configuration is now stored in the
selected memory location.
Press the Enter button to
save the preset.
ENTER
The Enter and Preset
buttons return to unlit or
background illumination.
Figure 40.
>
button.
selections.
C O N T R O L
VIEW ESC
PRESET
The button blinks once.
Clear All Selections
PRESET
All buttons with assigned presets
light.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location is overwritten.
Enter Save Preset Mode
The button blinks to indicate that this
preset number is selected but not saved.
INPUTS
2
3 4 6
5
Select the Preset
C O N T R O L
All input buttons return to unlit
VIEW ESC
or background illumination.
PRESET
Press the Enter Button
Preset Assigned
1 2
3
ENTER
•
The Enter button
blinks to indicate the
need to save the
7 8
preset.
•
The Preset button
continues to blink.
DXP DVI Pro and DXP HDMI Series • Operation
INPUTS
4 5 6 7 8
No Preset Assigned
C O N T R O L
VIEW ESC
PRESET
30