Extron electronics DXP DVI Pro User Manual page 129

Figure 117. Set and View Ties Page
The Set and View Ties page consists of the following major panels:
• Set & View Ties — Consists of a matrix of input (rows) and output (columns) selection
buttons. To create a tie using this screen:
1. Move the mouse over the matrix of input and output selection buttons. Click a
square to create a preliminary tie of the input and output associated with that
button (if they are not already tied) or a preliminary untie (if the input and output are
tied). A "P" (for preliminary) appears on the button.
If you lose track of the input and output associated with a specific button, let
•
the mouse rest over one of the tie buttons for a moment. A window pops up
(see figure 118) that identifies the input and output for that button.
Figure 118. Pop-up Field Providing Formation About a Button Tie
To tie an input to all outputs, click that input number, at the left of the matrix.
•
DXP DVI Pro and DXP HDMI Series • HTML Operation 121