Extron electronics DXP DVI Pro User Manual page 104

NOTES:
• Preset names are limited to 12 upper- and lowercase alphanumeric characters,
{space}, and the _ : = and / characters.
•
The following characters are invalid or not recommended in preset names:
+ ~ , @
• Show RS-232 strings — Displays the ASCII commands that are used by the current
configuration. You can refer to these for SIS programming (see
Control starting on page 49 for information on entering SIS commands).
Figure 93. RS-232 Program Strings Window
• I/O Group settings — Allows you to establish input-output groups.
1.
Drag two or more of the small boxes representing inputs or outputs to one of the
input or output Group boxes. You can drag boxes to a Group box from the Free
panel or from another Group box.
2. Repeat step 1 as desired.
3. Click Take to establish the groups.
Figure 94. Input/Output Groups Window
= ` [ ] { } < > ' '
DXP DVI Pro and DXP HDMI Series • Matrix Software
" " ; : | \ and ?.
SIS Configuration and
96