Extron electronics DXP DVI Pro User Manual page 79

Command
IP Setup Commands (continued)
Set mail server, domain name
Read mail server, domain name
Set e-mail recipient
Example:
View e-mail recipient
Set e-mail events for recipient
Example:
Set DHCP on or off
Read DHCP on/off status
ASCII Command
(Host to Switcher)
EX3^ X4) X3( }
, ,
CM
E }
CM
EX4! X4@ }
,
CR
E
,
72 Jsmith@folklore.netCR
EX4! }
CR
EX4#X4! X4$ X4%
, ,
}
EM
E }
I72,0,3EM
EX4^ }
DH
E }
DH
DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control
Response
Additional Description
(Switcher to Host)
X3^ X4) X3(]
, ,
Ipm Specify IP address
domain name
password
server.
X3^ X4) X3(]
, ,
X4! X4@]
,
Ipr Specify the e-mail account
and e-mail address
e-mail recipient.
Sets the recipient of the e-mail.
To receive e-mail notifications,
you must then set the events that
the switcher reports, using one
or more separate Set e-mail
events (EM) commands (see the
example below).
}
,
Ipr72 Jsmith@folklore.net
Show e-mail recipient address
X4@]
X4@
X4#X4! X4$ X4%X4%
Ipe * * ...
Set up events reporting:
X4#
= Notification selections, part 1
I = inputs
F = fans
P = power supply
X4$
= Notification selections, part 2
X4# X4$
If = I, then = 0 (all inputs) or 1 through 8
(input 1 through input 8)
X4# X4$
If = F, then = 00 (all fans)
X4# X4$
If = P, then = 00 (both power supplies)
X4%
= Notify when?
0 = no response
1 = fail or missing
2 = fixed or restored
3 = both 1 and 2
4 = suspend
You must first have set an e-mail recipient for the e-mail
X4!
account number ( ), using the separate Set e-mail
recipient (CR) command.
]
IpeI72*0*33333333
E-mail account #72
(recipient 8), JSmith, will
receive fail/missing and
fixed and restored messages for
all inputs.
Set DHCP to
X4^]
Idh
0 = Off (default), 1 = On
X4^]
X3^
, e-mail
X4)
, and
X3(
for the mail
X4!
X4@
for the
]
X4!
for e-mail account .
X4%]
X4^ X4^
.
For :
71