Extron electronics DXP DVI Pro User Manual page 121

Date/Time Settings Fields
The fields in the Date/Time Settings panel provides a location for viewing and setting
the time functions.
Figure 110. Date/Time Settings Fields
Change the date and time settings as follows:
1. Click the drop-down box for the desired variable.
The variables are month, day, year, hours, minutes, am or pm, and (time) zone. A
•
drop-list appears (the Month list is selected in figure 110).
2. Click and drag the slider or click the Scroll Up
until the desired variable is visible.
3. Click on the desired variable.
NOTES:
• If setting the time, set the local time, then select the offset from Greenwich
Mean Time (GMT) from the Zone menu.
•
The Zone field identifies the standard time zone that has been selected and
displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate Daylight Saving radio button. To turn off daylight savings
time, select the Off radio button (located to the left of the USA button).
NOTE: When daylight savings time is enabled, the switcher updates its internal
clock between standard time and daylight savings time in the spring and fall on
the date that the time change occurs in the United States of America and parts of
Europe and Brazil. When daylight savings time is turned off, the switcher does not
adjust its time reference.
6. Click the Submit button at the bottom of the Date/Time Settings panel to
implement your selections.
button or Scroll Down
DXP DVI Pro and DXP HDMI Series • HTML Operation
button
113