I/O Buttons - Extron electronics DXP DVI Pro User Manual

Digital matrix switchers
Hide thumbs Also See for DXP DVI Pro:
Table of Contents

Advertisement

Secondary functions (
In I/O grouping mode, selects group 4 (see
In I/O grouping mode, indicates that group 4 is selected.
With the Enter, Preset, and View
mode (see
Panel)
Selects 115200 baud for the Remote RS232/RS422 and the RS-232 Config ports
in serial port configuration mode.
Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
115200 baud in serial port configuration mode.

I/O Buttons

You must select video, audio, or both before creating or viewing a tie or a configuration.
This is done by pressing the Video button (see
Audio button (
Primary Functions
Action/indication:
Secondary Functions
Front panel locks
Resets
Port
configuration
Video button — The Video button does the following:
H
Primary function ():
 Selects and deselects video for a configuration that is being created or viewed,
and lights green to indicate that video is available for configuring or for viewing.
Secondary functions (
With the Enter button and Audio button, selects between front panel locks
(lock mode 2 and lock mode 0) (see
(Executive Modes)
With the Audio button, selects between front panel lock types (lock mode 2 and
lock mode 1).
With the Audio button, initiates system reset from the front panel (see
the System from the Front Panel
Selects the RS-232 protocol for the rear panel Remote RS232/RS422 port in serial
port selection and configuration mode and indicate the selection (see
the RS-232/RS-422 Port Protocol and Baud Rate (Rear Panel)
):
Selecting the RS-232/RS-422 Port Protocol and Baud Rate (Rear
on page 44).
).
I
Select or deselect
video.
Green when selected
Action 1:
With Enter, select lock mode 2 or toggle between
mode 0 and mode 2.
Action 2:
Select lock mode 1 or toggle between lock
modes 1 and 2.
Action:
Perform a system reset.
Action/
Select RS-232.
indication:
Blink: Selected
):
on page 38).
DXP DVI Pro and DXP HDMI Series • Operation
I/O Grouping
on page 32).
<
buttons, selects serial port configuration
figure 10
on page 13) or the
,
H
VIDEO
(DXP DVI Pro and HDMI
models only) Select or
deselect audio.
Red when selected
Select RS-422.
Blink: Selected
Locking and Unlocking the Front Panel
on page 40).
AUDIO
Resetting
Selecting
on page 44).
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxp hdmi

Table of Contents