Extron electronics DXP DVI Pro User Manual page 108

• Numbers in I/O boxes — Displays the input and output numbers in the I/O boxes
in the matrix window. You are not able to place icons in the boxes when this option is
selected.
Figure 99. I/O Boxes Containing the Input and Output Numbers
Catch FPC/other's Changes — When checked, sets the switcher to report all
•
configuration and setting changes to the Remote RS232/RS422 or Ethernet port
connection through which this selection was made. These reports allow the Matrix
Switcher Control Program to track the changes that occur in the switcher configuration
and settings, whether commanded via the front panel, the Remote RS-232/RS-422
port, or the Ethernet port.
Master-Reset button
The Master-Reset button on the menu bar clears all ties and presets, all output mutes,
and all I/O grouping.
NOTE: This button does not reset the Internet protocol (IP) settings.
DXP DVI Pro and DXP HDMI Series • Matrix Software 100