Table of Contents
Advertisement
EDID Minder
The PVT RGB D (EDID), PVT RGB D Plus (EDID), and PVT RGB AAP (EDID)
incorporates EDID Minder, which allows the transmitter to communicate the
appropriate EDID information to the source, ensuring correct video output
resolution.
The 5-pole EDID Minder settings DIP switch is located on the rear of the
wallplate. Once installed, these switch settings are only accessible by
removing the device from its installed location.
The factory EDID setting (default) is 1024x768@60 Hz (preset 2).
The EDID Minder has two modes; a Preset (Emulation) mode and a Learn mode.
•
•
To use the EDID Minder mode in Preset or Learn Mode, follow the instructions below
Using Preset mode
1.
2.
3.
4.
5.
6.
Preset Mode is available on all PVT RGB (EDID) models, and allows selection of
pre-programed EDID rates, as shown in the table below.
Learn Mode is available only on the PVT RGB D Plus model, and enables the displays
specific EDID information to be recorded and emulated by the input wallplate.
If already installed, disconnect any sources and displays from the
front panel and remove the wallplate from the wall.
On the rear panel, set DIP switch 1 to 50 or 60 kHz as desired.
Set DIP switches 2 - 5 accordingly to match the desired EDID rate
(see table below).
Connect the video source to the "Computer In" VGA connector
and a local display device to the "Monitor Out" port.
Restart the video source and display devices. Verify the image, making any changes to
the EDID settings as needed.
When the image is correct, re-install the wallplate. Re-connect and restart the source
and display devices.
Switch setting
Preset
Number
2
3
0
OFF
OFF
1
OFF
OFF
2
OFF
OFF
3
OFF
OFF
4
OFF
ON
5
OFF
ON
6
OFF
ON
7
OFF
ON
8
ON
OFF
9
ON
OFF
A
ON
OFF
B
ON
OFF
C
ON
ON
D
ON
ON
E
ON
ON
F
ON
ON
4
5
OFF
OFF
Learn Mode (PVT RGB D Plus only)
OFF
ON
ON
OFF
1024x768 (default)
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
PVT Series • Connections and Settings
AUDIO
IN
OUT
COMPUTER IN
MONITOR OUT
S G
IR OUT
ON
60
1 2 3 4
5
Hz
EDID
Selection
50
This setting is
for 1024x768@60 Hz,
preset 2 (factory default)
Resolution
800x600
1280x720
1280x768
1280x800
1280x1024
1360x768
1366x768
1400x1050
1440x900
1600x1200
1680x1050
1920x1080
1920x1200
N/A
13
Advertisement
Table of Contents
