Html Operation; Accessing The Web Pages - Extron electronics DXP DVI Pro User Manual

HTML Operation

This section provides procedures for accessing and using the DXP embedded web pages.
The following topics are included:
•
•
•
•
•
•
The DXP can be controlled and operated through its Ethernet port, connected via a LAN or
WAN and using a web browser such as Microsoft Internet Explorer
the DXP web pages, which provide an alternative means of configuring and operating the
switcher. These factory-installed web pages are always available and cannot be erased or
overwritten.
NOTE: If your Ethernet connection to the matrix switcher is unstable, try turning off

Accessing the Web Pages

Access the HTML pages as follows:
1.
2.
3.
Accessing the Web Pages
Special Characters
Status Tab
Configuration Tab
File Management Tab
Control Tab
the proxy server in your web browser. To do this in Microsoft Internet Explorer, click
Tools > Internet Options > Connections > LAN Settings, clear the Use a
proxy server... checkbox, then click OK.
Start the web browser program.
Click in the browser Address field and enter the IP address of your DXP.
NOTE: If the local system administrators have not changed the value, use the
factory-specified default, 192.168.254.254, in this field.
If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (/) following the IP address and the name
of the file to open.
NOTES:
•
The browser Address field should display the IP address in the following
format:
nnn.nnn.nnn.nnn/optional_file_name
• The following characters are invalid or not recommended in file names:
+ ~ , @ = `[ ] { } < > ' ' " " ; : | \ ? and {space}.
DXP DVI Pro and DXP HDMI Series • HTML Operation
. The browser displays
®
.html.
107