Preset button — (see
E
following:
Primary functions ():
Places the switcher in preset saving mode to save a configuration as a preset,
and in preset recalling mode to activate a previously-defined preset.
Blinks when the DXP is in preset saving mode and lights steadily when the
switcher is in preset recalling mode.
Secondary functions (
In I/O grouping mode, selects group 2.
•
In I/O grouping mode, indicates that group 2 is selected.
•
With the Enter, View
•
configuration mode.
Selects 19200 baud for the Remote RS232/RS422 and the RS-232 Config ports in
•
serial port configuration mode.
Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
•
19200 baud in serial port configuration mode.
View
<
button — The View
F
Primary functions (:
Places the switcher in view-only mode to display the current configuration.
NOTE: View-only mode also provides a way to mute and unmute outputs (see
Muting and Unmuting Video and Audio Outputs
Indicates that the DXP is in view-only mode.
Secondary functions (
In I/O grouping mode, selects group 3.
•
In I/O grouping mode, indicates that group 3 is selected.
•
With the Enter, Preset, and Esc
•
configuration mode.
Selects 38400 baud for the Remote RS232/RS422 and the RS-232 Config ports in
•
serial port configuration mode.
Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
•
38400 baud in serial port configuration mode.
>
Esc
button — The Esc
G
Primary functions ():
Cancels operations or selections in progress and resets the front panel button
indicators.
NOTE: The Esc
presets.
Indicates that the escape function has been activated (blinks once).
figure 10
on page 13) The Preset button does the
•
):
>
<
, and Esc
buttons, places the switcher in serial port
<
button does the following:
•
):
>
buttons, places the switcher in serial port
>
button does the following:
>
button does not reset the current configuration or any
DXP DVI Pro and DXP HDMI Series • Operation
on page 36).
16