Button Icons - Extron electronics DXP DVI Pro User Manual

Audio button — The Audio button (DXP DVI Pro and DXP HDMI only) does the
I
following:
Primary function ():
 Selects and deselects audio for a configuration that is being created or viewed and
lights red to indicate that audio is available for configuring or for viewing.
Secondary functions (
With the Enter button and the Video button, selects between front panel locks
•
(lock mode 2 and lock mode 0).
With the Video button, selects between front panel locks (lock mode 2 and lock
•
mode 1).
With the Video button, commands the front panel system reset.
•
Selects the RS-422 protocol for the rear panel Remote RS232/RS422 port in serial
•
port selection and configuration mode and indicate the selection.
Blinks to indicate that the Remote RS232/RS422 port is set to the RS-422 protocol
•
when the DXP is in Serial Port Configuration mode.

Button Icons

You can temporarily remove the numbered translucent covers on the input and output
pushbuttons to insert labels behind the covers.
Input and output labels can be created easily with the Extron Button Label Generator
software, which is provided with every Extron matrix switcher. Each input and output button
can be labeled with names, alphanumeric characters, or color bitmaps. See
Generator
removing and replacing the translucent covers.
1
1
Figure 11.
•
):
on page 104 for details on using the labeling software and the procedure for
INPUTS
2 5
VCR Computer
4 5
Document
DVD
Camera
OUTPUTS
Example of Button Labels on a DXP Front Panel
7
Computer
VTG 200
6 7 8
DXP DVI Pro and DXP HDMI Series • Operation
Button Label
18