Sis Commands For Dxp; Symbol Definitions - Extron electronics DXP DVI Pro User Manual

Symbol Definitions for DXP SIS Commands
]
}
•
E
NOTE:
X!
X@
X#
X$
X%
X^
NOTE:
X&
X*
NOTE:
X(
X1)
X1!
X1#
NOTE:
X1$
X1%
X1^
= Carriage return and line feed
¦
or = Carriage return (no line feed)
= Space
W
or = <Escape> key
Input and output numbers in commands may be entered as either one-digit, two-digit,
or three-digit numbers. All input and output numbers are reported as two-digit numbers in the
response.
= Input number
= Input number (for ties)
= Output number
= Lock mode, power,
supply or individual
mute status
= Group number (for I/O
grouping)
= Room number (for room
presets)
A room is a subset of operator-selected outputs that relate to each other. The DXP
switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.
= Global preset number
= Room preset number
A room preset is a stored configuration with all of the outputs assigned to a single room.
When a room preset is retrieved from memory, it becomes the current configuration.
= All video and audio mute
status
= HDCP status
= Connection status
= Name
The following characters are invalid or not recommended in the name:
{space} ~ , @ = ` [ ] { } < > ' ' " " ; : | \ and ?.
= Total inputs
= Total outputs
= Voltage
DXP DVI Pro and DXP HDMI Series • SIS Configuration and Control
1
– maximum number of inputs for your model
0
– maximum number of inputs for your model
0
( = untied)
1
– maximum number of outputs for your model
0
= lock mode 0, not OK, or unmuted
1
= lock mode 1, OK, or muted
2
= lock mode 2
1 4
through groups
0
= no group
10
maximum. Each room can have up to 10 room
X*
presets ( ) assigned.
00 32 00
– ( = current configuration)
00
– current ties for the room in view mode, 10
maximum
0
= no signals muted
1
= video muted
2
= audio muted
3
= video and audio muted
0
= No input or output is connected.
1
= Input or output is connected and is not HDCP
compliant.
2
= Input or output is connected and is HDCP
compliant.
0
= no input connected
1
= input connected
12 characters maximum for input, output, and global
preset names
11 characters maximum for room names
Upper- and lowercase alpha characters are valid.
Total number of inputs for this switcher
Total number of outputs for this switcher
Positive or negative voltage and magnitude
54